Rectangular Dowel Plate
Sleeve design allows 20mm to 37mm lateral movement in both directions (depending on Rectangular Dowel Plate size), 30mm maximum joint opening, with zero vertical movement. No drilling of timber required, just nail UNISLEEVE® onto timber.
Other advantages include the certainty that sleeve will remain horizontal during casting process, so no misaligned dowels. Wider spacing also means fewer dowels are required, reducing costs of materials and installation time.
RECTANGULAR ABS SLEVE AND PLATE
SIZE: 150 X 100 X 6,8,10 MM
Technical Details of Rectangular Dowel Plate
Classification | Property | Values | ||||
Dowel Plate |
Material | Plates are manufactured from steel certified to meet BS 43B | ||||
For corrosion resistance plates can be manufactured from Electroplated zinc steel | ||||||
For corrosion resistance plates can be manufactured from Grade 304 stainless steel. | ||||||
Thickness | 6 x 100 x 150 mm ± 0.5 mm | |||||
8 x 100 x 150 mm ± 0.5 mm | ||||||
Dowel Plate: BS 43B | C % | Mn % | Si % | P % | S % | |
0.21 | 1.50 | 0.50 | 0.05 | 0.05 | ||
| ||||||
Sleeve |
Material | Sleeves are molded from high density HDPP plastic with internal fins and spacers that ensure load plate is installed in correct position | ||||
Shapes | Rectangular as per Dowel Plate Size. | |||||
