Repair Joint – AP International Joints

repair Joint

Repair Joint

Ap Internationals Signature AR is an arris ‘repair and upgrade’ system for damaged construction joints in concrete floors.

The damaged concrete around the construction joint is cut away, and Signature AR is installed in its place, using professional-grade mortar and concrete bonding agents manufactured by RCR Flooring Products.

The distinctive Signature shape allows vehicles to cross in any direction, causing no impact and no damage to the joint or vehicle. This means Signature AR provides a once-and-for-all repair, and is a vast improvement on the original straight joint.

Technical Details of Repair Joint

Classification	Property	Values
System	Overall Length	625 mm ± 1mm
	Overall Depth	Fixed Joint Depth: 40 mm





Joint Arris Armoring	Material	Glass Reinforced Nylon (GRN)
	Height	40 mm ± 0.5 mm
	Thickness	4 mm ± 0.5 mm
	Weight	410 Gram

Applications

• Internal and external concrete joint arris repairs, and across doorways
• Ideal for defined movement areas (transfer and racking aisles)
• Suitable for freezer stores and anti-static environments (eg, electronics manufacturing)
• Suitable for use with most vehicle types.

Benefits

• Triple wave shape prevents impact damage at the central arris and the two edges of the plate.
• Can be approached from any angle, even 90°, without causing impact. Suitable for directional traffic situations.
• Helps reduce noise and vibration impact on forklift drivers*.
• Allows flexibility in future building use.
• For slabs depths from 150mm to 200mm, an extension plate enables easy height adjustment on site (fixed height joints available to special order).
• Narrow top plate aids stability and allows an accurate joint level to be set easily.
• Continuous concrete ties, set down from the surface, ensure secure anchoring.
• Narrow top plate enables good concrete placement and compaction.
• Gentle wave shape aids trowel finishing.
• Compatible with TD plate dowels.
• Joint design resists significant ingress of debris into the joint.
• Supplied in mild steel as standard. Galvanised finish and stainless steel top plate options are available to special order.
• Supplied in 2.4m lengths.
• Possibility to use more dowels per one joint (5D, 6D) to increase max loads on floor
• Standard grade steel on top S235, dowel system S355 - Nylon screws M10 providing possibility of separation and work between floor fields
• Plastic cover made of highly resistant ABS plastic

repair img_20151216_211559__629x640_

repair kpm6-0

For More
Information

+91 9920973835

Get In Touch